JSW metal hot melt adhesive film，It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°f(21°c) / 50% relative humidity out of direct sunlight.
JSW-JSW plastic hot melt adhesive filmhas good impact resistance. It has good adhesion with various substrates. Product features: good adhesion: it can bond a variety of substrates (such as PP, PC, ABS, PMMA, metal, glass and other TP lens bonding), pure solid, non corrosive. TheJSW plastic hot melt adhesive filmcan work in - 25 ℃ ~ 95 ℃ for a long time. Excellent weather resistance, sealing, corrosion resistance, aging resistance, creep resistance, temperature shock resistance. The initial curing can be achieved 10-20 minutes after the application of glue.JSW plastic hot melt adhesive film bonding technology is gradually establishing and improving its technical standards and process specifications, and expanding its application scope. In particular, the emergence of JSW plastic hot melt adhesive filmtechnology and nano materials is a technological reform and an industrial reform. It can be predicted that JSW plastic hot melt adhesive film material will have a significant impact on the modification of the adhesive, and the latest research results of JSW adhesive will be obtained.
With the development of electronic industry, it is urgent to replace the traditional adhesive withJSW plastic hot melt adhesive film, which is faster, safer and more economical. The proportion of urban population in China's total population has increased from 26% in 1990 to 51.2% in 2011, and is expected to rise to 70% by 2035, which indicates that there are great development opportunities in the mass electronic consumer market. In the mobile phone industry, the proportion of use is also rising, so JSW615 hot melt adhesive industry has a very strong development momentum in both developed and developing countries in the future. JSW plastic hot melt adhesive filmcan be applied to various materials and metals such as PMMA directly. In the window industry, JSW plastic hot melt adhesive film has been widely used. The development ofJSW plastic hot melt adhesive filmfor combined mobile phones and flat plates has achieved initial success and is expected to make contribution to the digital industry.
It is estimated that in 2015, the number ofJSW plastic hot melt adhesive film used in domestic digital manufacturing industry will reach more than 500000 pieces / month, a year-on-year increase of 5.4%; the daily average number of glue used in domestic digital manufacturing industry will be 6 million pieces / year, an increase of 3 million pieces / year over the previous year, a new record of JSW plastic hot melt adhesive film used in electronic manufacturing industry. Fortunately, the production line of JSW company was redesigned and installed in April last year. The production capacity not only keeps up with the demand of glue consumption in the market, but also creates a strong market environment for future development. The growth rate of JSW615 hot melt glue consumption in assembly plant is low. As far as the adhesive industry itself is concerned, affected by the low production of hand-held products in the previous year, the traditional adhesive industry will be severely damaged from January to April 2015. This also means that JSW company will have a good performance in January April JSW plastic hot melt adhesive film.
